SANSCO PoE CCTV Security Camera System with 1TB Hard Drive, 4CH 2K NVR with (4) 5MP Outdoor IP Cameras (2560x1920, Built-in Mic, AI Movement Detection Less Fault Alarm, Instant Email/Push Notification)

• Connect IP cameras to the integrated power-over-ethernet (PoE) ports for a truly plug-and-play surveillance experience. Each camera only requires a single ethernet cable to connect it to the NVR thanks to PoE technology. Simply insert one side of the ethernet cable to the camera and the other to the NVR - and your cameras will be ready. This all-in-one cable provides both power to the camera and video transmission up to 300ft / 91m (Cables provided are approximately 18m). This means that you do not need to install your security cameras to a power outlet nearby.

• Classic design simple but grand, feeling absolutely peace of mind wherever you are as long as the SANSCO security camera system is in your home/office. HD camera, crisp 1080p resolution offers you videos or pictures with accurate and natural colors during the daytime, and 36 IR LEDs for every camera enable good night vision. Smart motion detection makes sure that you know anything wrong or abnormal in real time. the DVR is perfect for the home or small business. 

Features:

• PoE Network Video Recorder Specifications
• IP Video Input: supports 4 IP cameras
• Video Output: Monitor or HDTV via VGA, HDMI
• Playback: 4 cameras play simultaneously
• HDD Installed: Pre-installed a 1TB HDD
• Power over Ethernet Sockets: RJ45 X 4
• USB Port: USB 2.0 x 2
• Remote Access: iPhone/Android Phone, Windows PC. Local Access only for Mac PC

PoE IP Cameras Specifications

• Image Sensor: 1/2.7" 5MP CMOS (2592x1944)
• Lens: 80°@3.6mm
• Night Vision: 15-20m, IR LED
• Viewing Angle: Horizontal: 80°, Vertical: 58°
• Audio: Built-in Microphone
• Power: Power over Ethernet (PoE)
• Working Temperature: -10° C +55℃ (14°-131° F)

Package:

• 1x 5MP HD Network Video Recorder
• 4x 5MP PoE Cameras
• 4x 18M Cat5 Cables
• 1x 1M Cat5 Cable
• 1x 48V Power Adapter
• 1x USB Mouse
• 1x Quick Start Guide

Before Buy

• Default NVR output resolution is set @1080p (1920x1080). If you are using a HDTV with resolution no less than 2560x1944 pixel, you can configure the NVR output resolution to a higher value to have the optimal image quality, you can configure the resolution here: Main menu > System > Display > Resolution. If you TV support maximum 1080p resolution, plesae do not attempt to change the NVR output resolution to any higher value.